Home Search by Brand Hand Tools Clamps Hammers Wrenches  
  What are you shopping for?  


 

Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery)

Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery)
MSRP: $117.79
Your Price: $74.99
Savings: $ 42.80 ( 36% )
Shipping: Usually ships in 24 hours
Manufacturer: Panasonic
Buy Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery)
 

Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery) Features

Auto shut-off electronic clutch with a max. torque of 39 in/lbs.
Clutch torque accuracy is plus or minus 5%
22 stage clutch offers you more precise torque setting.
Easily converts from straight to pistol form
1 Year warranty, 30 Day satisfaction guarantee
 

Accessories for your Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery)

Champion ELEC-KIT Electrician's Kit with CT3 Tungsten Carbide Tipped Hole Cutters-Sheet & Stainless Steel (7/8", 1-1/8", 1-3/8")
Champion TWISTER-XL28 Brute Platinum HSS Twister Mechanics Length Drill Bit Set-29pc 135 Deg. Split Point Water Resistant Index
Kreg Jig K4 Pocket Hole System
Kreg R3 Jr. Pocket Hole Jig System
Champion SL15-XL28 Brute Platinum HSS Slimline Mechanics Length Drill Bit Set-15pc 135 Deg. Split Point
 

Related Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery) Products

Battery) Only, 1/4-Inch Cordless Hex (Tool EY6225C Panasonic Bare-Tool 3.6-Volt No Drill/Driver Ni-Cad
Battery) 3.6-Volt Bare-Tool Drill/Driver 1/4-Inch Ni-Cad Panasonic (Tool Cordless Only, Hex No EY6225C
Battery) Bare-Tool Ni-Cad EY6225C Hex Panasonic 1/4-Inch Only, No 3.6-Volt (Tool Drill/Driver Cordless
Panasonic Cordless Bare-Tool Hex 1/4-Inch Drill/Driver 3.6-Volt Ni-Cad Battery) EY6225C (Tool No Only,
Ni-Cad (Tool Hex Panasonic Drill/Driver Battery) 3.6-Volt No 1/4-Inch Cordless Bare-Tool EY6225C Only,
Cordless Battery) Drill/Driver (Tool 3.6-Volt 1/4-Inch Only, Hex Bare-Tool Panasonic EY6225C Ni-Cad No
 

Additional Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery) Information

Light and compact, this handy little 3.6-volt screwdriver quickly converts from straight to pistol form for easy drilling in tight, awkward quarters and from a variety of angles. The tool is a great answer to smaller drilling and driving jobs around the house where a full-size drill would be cumbersome overkill. It’s also perfect for assembly work, speeding up production with easy of use and maneuverability.

The tool is equipped with a large forward/reverse switch conveniently located within thumb’s reach for switching directions on the fly. Designed for versatility, a two-speed gearbox offers 200 rpm in slow mode and 600 rpm in high mode. An auto shut-off, 22-stage clutch prevents over tightening and stripping. For less downtime and more productivity, the tool is powered by a 3.6-volt battery that fully charges in just 15 minutes (EY0225B charger sold separately). The tool offers 39 inch-pounds of maximum torque, easily taking on a wide array of maintenance projects around the home, apartment, or office. --Brian D. Olson

Applications:
Rack/cabinet installation, electric work, service engineering, production line/assembly work.

 

What Customers Say About Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery):

Saves time, wear and battery life.the charger. first the 2.4 volt version and now the 3.6 -- I have two. I've been using these drivers for over 20 years. full battery in 15 minutes. Great range of torque selection, super battery life, light and powerful. I really like the automatic motor cut off when the correct torque is reached. but don't get the cheap knock-off batteries, they are bigger, heavier, and do NOT last. get the genuine.Get one (or more)

Strange as it may seem, needing a new battery is a good thing as many of the screw guns I used in the past didn't last till the battery went dead. This one is very light and versatile. I have tried many screw guns of every shape and size in the last 15 years. What good is one without the other. It's not often I find things this good these days, most are cheap, undependable and fragile. It seems they are selling the gun and charger separate.silly, yes.

Rather than running while slipping which will waste battery power. When it reaches whatever torque you set it to, it stops, saving battery power. It will go in smaller places than any drill/screw-gun. Your arm NEVER gets tired from holding it. I service many electro-mechanical instruments. I think I may be needing a new battery now.The last 3 charge cycles lasted less than a week. I was here to buy a battery for it decided to give it a good review.

I have dropped this screw driver at least 20 times and sometimes on concrete at 6 foot high. It still runs perfect except now it needs a battery. It charges in 20 minutes. It is very powerful and has torque settings. Anyway I hope this helps you decide to get this gun.wow I should get paid for this.

The battery lasts a long time, usually about 2 weeks with light to medium daily use. I have had mine for 2yrs and love it. I picked up mine with the charger as a package deal for 129.00 here at Amazon 2years ago. Great tool.goofy marketing.

I have used one these for years as a residential electrican installing hundreds of switches and outlets a year. I would never have lasted 30 years without one, great time saver too.

I have always been happy with Panasonic products. I have charged the batteries no less than 300 times a piece and they still perform like new.

The battery will last all day and then some. I have used this drill driver for over 2 years and never had a problem.

I have dropped it from some 6-10 feet and it still keeps on ticking, I don't recommend dropping any tool of course but accidents happen. I do commercial Electrical work and I am very hard on the drill.

I use it constant all day long 6 days a week. This is without a doubt the best tool I have ever purchased in 25 years.

I feel so positive about this drill driver this is the first review I have ever taken time to write.

the panasonic driver is the tool for interior work. this is a pro tool and well worth the money.

it is the fastest at 600 rpm. i am a mechanic at a mercedes dealer, i've used and tried many-many drill drivers, & this panasonic is the best.

the electronic clutch is very adjustable and precise for torque settings,i use it everyday with only one battery; the fifteen minute charger is a must. very light.

easy to use. the only other driver comparable is the milwakee but slower at 450rpm.

i recomend it highly.

Buy Bare-Tool Panasonic EY6225C 3.6-Volt Ni-Cad 1/4-Inch Hex Cordless Drill/Driver (Tool Only, No Battery)
© 2006 - 2010 AZSources.com - Power Tools : Privacy Policy